If you are going to introduce a new video game on the market, then you have to give your business a boost by using Video Game boxes. You can use your creativity and imagination to design a beautiful game box by yourself. This box is not only utilized to keep the video game safe but to grab the attention of the target audience. Blank board game boxes can also be made at home if you have DIY expertise. If you do not know, then you can make blank and straightforward board games boxes.

Game Packaging Boxes

There are several methods present to create boxes for games. But it is tough for a person to decide and select the most straightforward way. DIY experts can create any table quickly, and they get the idea in a short time.

However, for the beginners, it is a very tough job to choose a method and follow it. For this reason, we are here with a straightforward process of creating a box for any video game. You can also make a custom box which can be used for various purposes. If you want a table for your game, then look at the steps given below:

Step 1: Break the box down

You first have to break down the table. You have to start by opening up the tabs that are present on the top. After that, you have to go to the bottom of the box. You only need to unfold the flaps. Now, cut out the tape with the help of the box cutter and then again reveal the folds. You have to put down the box on its every side. Cut any one of the corners from its top to the bottom in such a way that you can with no trouble open out the cardboard.

Step 2: Time to make the corners

Get a piece of cardboard which is long and then place your product on it. You have to take a bold marker or pen. Mark half of the width of the product, which is equivalent to the gap present amongst the product and the side of the cardboard. Thus, if you will fold the cardboard on the product, then it will only be a halfway on that side of the carton. Get the pen and draw the lines on which you have to cut the cardboard. You will need to cut very slowly with the box cutter to cut the cardboard piece where the product's edge meets with the cardboard.

You can make as many Video Game boxes in this way as you like. You do not have to cut the cardboard completely to remove it at this point of the line. For Custom cardboard game boxes, you only need to mark up the line with the help of the blade which can cut the top of the surface of the cardboard. Next, make a parallel cutting line on every side of the product. You have to roll out the product on its side. Yet, it is present on the previous cutting line. You need to create another parallel cutting line when that product is currently at the angle of 90 degrees. Just lay down that product at the corner of 180 degrees. Place the one side of the product on the previous cut line while the other parallel to the cutting line present on edge. At the moment, you have to leave half the width of the product as the space on the cardboard. Cut out the excess part of the cardboard entirely from top to bottom with the help of box cutter.

Step 3: Cut to the Dimension

Currently, you have to press the product in the downward direction or the cardboard in an upward trend. You have to do it so that you can cut it down to the right size. Keep in mind; you do not have to press the product precisely to the edge. Leave the half-width of the side of the product as extra cardboard which can be folded up onto the dimensions of the product. You have to cut out the excess cardboard from each side by leaving half the width of the product as extra cardboard on the reverse side.

Step 4: Flip and Fold

It would help if you now did the flip and fold level, which is quite easy. You need to take the product off the cardboard material and then flip it onto its every side. Only do the folding on the cut lines, and you will see how perfectly it forms and bends the corners of the box. Put the item in the box and shut the folding. Fix up the sides if necessary and then use the tape on the table. Put the tape where the edges meet from top to bottom.

Step 5: Fix the Sides

You have to keep an eye on any of the two open sides, and then you will see the bottom of your product. There might be an excess cardboard material hanging around. But this material will be utilized to do the folding and to make them a properly shaped box for the games. It will help if you cut out the exposed corners to create four tabs. Cut out from the inside to outside position by using a box cutter. When you cut out the four corner sides, then make four cut lines on each edge where the cardboard will be folded crosswise the product.

Keep on repeating this procedure for making out the sides of the box. After folding, you are ready to apply tape. It does not matter if you want to use the tape once or on all pieces together. It only depends on how much tape is required for your box. The box which has been cut well would need a line of tape across its sides where the edges will meet up. Ta-Da! Your table is ready now!

Last word

Custom board game boxes can be made with the same method explained above. However, for simple Video Game boxes, we have described a simple and excellent way.

Each of the tables would be remarkable in displaying your video games if you will follow the technique right.